Front loaders are essential equipment on a farm. They’re indispensable accessories on a livestock farm. In any case, the equipment must be high-quality and perfectly matched to the tractors in use, which is why Landini offers its customers five different series of loaders
The Landini tractor range extends from the compact “Mistral2” tractors, starting at 42 horsepower, to the top-of-the-line “Series 7” tractors, boasting 240 horsepower. In between are the specialized compact “Rex3” tractors, the specialized “Rex4” tractors, the crawler “Trekker4” tractors, the “Series 4” and “Series 5” farm tractors, and the open-field “Series 6” tractors, all offered with a wide variety of engine power and features.
Just think that in terms of performance alone, there are more than 40 choices made available by the Emilian brand and each of them can then be combined with two to five choices in terms of transmission for a total of over 200 different powertrains which, in fact, give life to just as many models, often further diversified from each other in terms of equipment.
A truly comprehensive range, therefore, capable of satisfying any work requirement, leveraging not only structural and performance features but also advanced customization options directly from the factory and therefore covered by the same warranty terms that apply to all Fabbrico machines. Among these optional extras, the “L” series front loaders play a primary role. These attachments are available in five different series so that they can equip all the company’s models, always blending in a balanced way with their characteristics.
In addition to total and complete compatibility with the machines on which they are installed, all loaders feature punctual and rapid self-leveling of the buckets, as well as load capacities and height extensions that exceed industry standards. These features are combined with a design oriented towards attention to detail and a wide range of terminal attachments, all designed to minimize tare weight in favor of load capacity.
The attachments are also supplied with push-pull predisposition or “Faster” multi-connection plate which, together with the “Velotak” and “Flash System” systems, speeds up coupling and uncoupling times. The sides are designed to distribute the weight on three points: front, center, and rear, thus ensuring uniform load distribution across the entire machine and not just the front axle.
Once mounted, the loaders do not impair front or side visibility, do not penalize the turning angle of the wheels, and thanks to the presence of nitrogen accumulators, the “Genius System”, they always work progressively and easily.
This task is also performed by specific ergonomic joysticks, available in four versions, one of which is electronically proportional. These systems allow operators to control the loader’s operation with their right hand, and the tractor’s forward and reverse motion with their left.
These maneuvers are made easy and direct by the ability to program the reverse shuttle’s responsiveness and, on some models, by the “Stop&Action” system, which allows the tractor to be stopped and reversed using only the brake pedals and the reverse shuttle, without having to use the clutch.
Landini loaders also feature a bucket dipstick that allows for visual monitoring of the implement’s position, adjustable support feet, and side panels that do not compromise the tractor’s ease of maintenance. All of this is combined with load-bearing structures made of high-strength “Domex” or “Hle” steels and manual, mechanical, or hydraulic leveling systems.
Ten good reasons to buy
- The breadth of the range.
- The intrinsic robustness of the structures and the reliability of the management systems.
- The full factory warranty on the tractor + loader system.
- The option to choose between four different ergonomic joysticks, one of which is proportional and electronic.
- The tractor’s ground clearance and maneuverability remain unchanged.
- The presence of shock absorbers that make work progressive and fluid.
- The hydraulics are made partly with rigid metal tubes that reduce oil heating and facilitate maintenance.
- The option to keep the front lift and its PTO installed, if present.
- The “Euro Hitch” attachment system that allows for the attachment of a wide range of implements.
- Perfect bucket control thanks to the presence of a specific rod.
Title: Front loaders Landini: indispensable accessory for logistical needs
Translation with ChatGPT
