Claas Axion 9 Cmatic: a generational leap

With the new high-power “Axion 9 Cmatic” series, Claas raises its standards of productivity and automation through brand-new technical and functional solutions aimed at making even the most intensive cropping cycles faster and more economically sustainable. This is also made possible by type approval for Level 2 autonomous driving

After self-propelled harvesters, telescopic handlers and forage equipment, it is now the tractors’ turn. At Agritechnica 2025, Claas completed the comprehensive range update that began in summer with the launch of the new “Jaguar 1000” self-propelled forage harvesters, the latest-generation “Trion” and “Lexion” combines, the updated handlers and the all-new “Cerex 700” round balers, by unveiling the new high-power tractor series “Axion 9 Cmatic”.

A direct evolution of the previous top-of-the-range “Axion 900” models, the new series aims to further raise productivity and automation standards, with a focus on speeding up and optimising the most demanding and intensive cropping cycles.

As with the previous generation, five models are available: “Axion 9.330 Cmatic”, “Axion 9.360 Cmatic”, “Axion 9.390 Cmatic”, “Axion 9.420 Cmatic” and “Axion 9.450 Cmatic”. Two of these, the “Axion 9.360 Cmatic” and “Axion 9.450 Cmatic”, are also offered in the “Terra Trac” version, Claas’ tracked system based on a large-diameter drive wheel, reinforced drive transmission and newly designed spoked wheels whose outer surfaces feature lugs designed to expel the slurry that accumulates between roller and belt when working on soft or highly humid soils.

Claas Axion 9 Cmatic
Claas Axion 9 Cmatic

Power outputs also remain largely unchanged compared with the “Axion 900” range, spanning from 330 to 450 horsepower and delivered by FPT Industrial six-cylinder “Cursor 9” engines with a displacement of 8.7 litres. New and exclusive to the “Axion 9 Cmatic” series is the dynamic “Auto Droop” function, which automatically adapts power delivery to the load demanded by the task at hand, ensuring the lowest possible energy absorption and therefore minimal fuel consumption. These objectives are also shared by the updated “Cmatic” continuously variable transmission, a ZF-derived unit with four mechanical ranges, whose electronic transmission management system has been completely redesigned to provide a smoother and more comfortable driving experience.

Agritechnica 2025

In this context, the transmission now features a control system that allows seamless switching between driving modes without changes in speed or engine rpm, while the “Auto Load Anticipation” function predictively optimises engine speed and transmission ratios.

It is based on an adaptive algorithm and efficiency maps for the engine, transmission, hydraulics and auxiliary systems. In practice, the system automatically detects load peaks—such as when an implement enters the soil—and proactively increases engine speed, ensuring stable and smooth traction even during dynamic variations. This avoids both manual intervention by the operator to meet higher power demands and energy absorption peaks that would negatively affect fuel consumption.

Claas Axion 9 Cmatic
Claas Axion 9 Cmatic

Configured in this way, the new “Axion 9 Cmatic” tractors ensure maximum operational efficiency even in the most demanding and intensive applications. In these contexts, they can also benefit from a hydraulic system delivering 220 litres per minute, expandable to 370 litres per minute via an optional second 150 l/min pump. This system can supply up to ten spool valves—eight rear and two front—as well as a rear three-point hitch with a maximum lifting capacity ranging from 11,000 to 13,000 kilograms depending on the model, and a corresponding front hitch rated at 6,500 kilograms.

There are therefore no issues when working with combined implements that are particularly demanding in terms of structure and hydraulic power. Moreover, such open-field applications can be fully automated by the new “Axion 9 Cmatic” models.

The series is in fact approved for Level 2 autonomous driving thanks to the AgXeed “VCU” (Vehicle Control Unit), which enables the machines to execute preconfigured work orders fully autonomously by interfacing with the tractor’s ISOBUS system and synchronising with the AgXeed “TraXwise” platform via the “Claas Connect” portal.

Claas Axion 9 Cmatic
Claas Axion 9 Cmatic

Once the work orders are imported, the tractor and implement autonomously carry out field operations, including automatic steering, obstacle avoidance and rate control according to prescription maps. The operator is thus free to focus exclusively on monitoring work quality, while always retaining the option to intervene manually whenever deemed appropriate or necessary.


Like a Suite

Claas Axion 9 Cmatic
Claas Axion 9 Cmatic

Completely redesigned, the four-point-suspended cabs fitted to the “Axion 9 Cmatic” series offer an internal volume of nearly three cubic metres and a noise level of just 66 decibels—both among the best in the industry. Also class-leading is the size of the cab access area, which opens onto an interior that welcomes operators with premium leather seats featuring pneumatic suspension and the ability to rotate through a total arc of 50 degrees—40 degrees to the right and 10 degrees to the left—to facilitate implement monitoring.

Claas Axion 9 Cmatic
Claas Axion 9 Cmatic

Three integrated cameras—two rear and one front—provide full visual control of the area around the machine, with images that can be enlarged, reduced and repositioned easily via the new “Cebis Connect” terminal. This terminal is based on a completely renewed electronic architecture that pairs the main 12-inch display integrated into the armrest, dedicated to managing functional systems, with a second 12-inch touchscreen that can be freely swapped with the main one. An additional terminal installed on the right-hand front pillar displays all the tractor’s main operating parameters.


Cvt Also for Specialists

Claas Axion 9 Cmatic

The new “Nexos 2 Cmatic” specialist tractors also made their debut in Hanover. The range comprises four models with outputs between 85 and 120 horsepower, all equipped with the “Cmatic” continuously variable transmission. Available in four versions—“S”, “M”, “L” and “XL”—with widths of 1.00 m, 1.25 m, 1.45 m and 1.55 m respectively, they integrate the new “Vehicle Drive” travel management system.

In “Auto” mode, this system automatically adjusts engine speed and transmission ratio according to operating conditions and required power, while two electro-hydraulically switchable speed control levers for field and road ensure maximum smoothness and the ability to reach 40 km/h on the road with the engine turning at just 1,530 rpm.

The new Claas “Nexos 2 Cmatic” specialist tractors will be the subject of dedicated in-depth coverage in upcoming issues of the magazine.

Title: Claas Axion 9 Cmatic: a generational leap

Translation with ChatGPT

Related posts